119
DVQP1242
4K Photo and Drive Settings
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
Select the focus point and save the picture ([Post Focus])
1
On the playback screen, select the image with the
[ ] icon and press
• The same operation can be performed by touching [ ].
2
Touch the focus point
• If there are no pictures with the focus on the selected point, a red
frame will be displayed, and pictures cannot be saved.
• The edge of the screen cannot be selected.
Operation Touch operation Description
Touch
Select focus point
• No selection can be made while display is enlarged.
Enlarge display
Shrink display (when in enlarged display)
[Fn1]
Switches to [Focus Stacking] operation (→120)
[Fn2]
In-focus portions are highlighted with colour. ([Peaking])
• Switches in order of [
] → [ ] ([LOW])
→ [
] ([HIGH]).
[MENU/SET]
Save picture
• You can make fine adjustments to the focus by dragging the
slide bar during enlarged display. (The same operation can be
performed using
.)
3
Touch [ ] to save the picture
• The picture will be saved in JPEG format.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
