266
DVQP1242
Wi-Fi
[Wi-Fi Setup]
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
→ [Setup] → [Wi-Fi] → [Wi-Fi Setup]
[Wi-Fi Password]
You can improve security
by enabling password entry
for a direct connection to a
smartphone.
[ON]: Connects the camera and a smartphone using an SSID and
password. (→234)
[OFF]: Connects the camera and a smartphone using an SSID.
(→233)
• When [ON] is selected, you can also set up a connection by
scanning a QR code. (→234)
[LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID. (→255)
[PC Connection]
You can set the workgroup.
You must connect to the same workgroup as the destination
computer when sending pictures to the computer.
(The default is set to “WORKGROUP”)
[Change Workgroup Name]:
Enter the workgroup of the connecting computer.
[Restore to Default]:
Returns settings to default settings.
• For details on how to enter characters, refer to “Entering Text”
(→50)
• To use with a computer of the standard settings, you do not have
to change the workgroup.
[Device Name]
You can change the name
(SSID) of this unit.
Press [DISP.] button
Enter the desired device name (Up to 32 characters can be
entered)
• For details on how to enter characters, refer to “Entering Text”
(→50)
[Wi-Fi Function Lock]
To prevent incorrect operation
or use of the Wi-Fi function
by a third party and to protect
saved personal information,
it is recommended that you
protect the Wi-Fi function with
a password.
Setting a password will automatically display the password input
screen when the Wi-Fi function is used.
[Setup]: Enter any 4-digit numbers as the password.
[Cancel]
• For details on how to enter characters, refer to “Entering Text”
(→50)
• Make a copy of password. If you forget the password, you can
reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however
other settings will also be reset. (excluding [LUMIX CLUB])
[Network Address]
Displays the MAC address and
IP address of this unit.
• A “MAC Address” is a unique address that is used to identify
network equipment.
• “IP address” refers to a number that identifies a PC connected to
a network such as the Internet. Usually, the addresses for homes
are automatically assigned by the DHCP function such as a
wireless access point. (Example: 192.168.0.87)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
