33
Recording
(ENG) DVQX1356
∫ Adjusting the AF Custom settings
1 Press 2/1 to select the AF Custom setting.
2 Press 3/4 to select the items, and then press 2/1 to adjust.
• To reset to the default settings, press [DISP.].
3 Press [MENU/SET].
Setting the Auto Focus Mode
Applicable modes:
This allows the focusing method that suits the positions and
number of the subjects to be selected.
Press [ ].
[AF Sensitivity]
Sets the sensitivity to be applied when adjusting the focus
according to the movement of the subject.
[AF Area Switching
Sensitivity]
Sets the sensitivity level at which the camera switches or moves
the AF area to suit the movement of the subject.
[Moving Object
Prediction]
Sets the level at which object motion detection is activated in
response to a change in the speed of the subject.
([Face/Eye
Detection])
A person’s face, eyes, and body (the entire
body or the upper half of the body) are
automatically detected.
• When the camera detects a person’s face
(A, B) or body (C), an AF area is displayed
over the detected person.
• When a person's face or eyes are detected,
the eye closer to the camera will be brought
into focus.
¢
¢ The exposure will be adjusted to the face. (When [Metering Mode] is set
to [ ])
• When a person’s body is detected, it will be brought into focus.
• The camera can detect the faces of up to 15 people.
• To specify the person or eye to be brought into focus,
align an AF area with the desired person or eye. You
can do so easily by touching a person indicated with an
AF area. To cancel the setting, touch [ ].
DC-GH5SPP-DVQX1356_eng.book 33 ページ ２０１７年１２月１２日 火曜日 午後４時５１分
To Next Page
Loading...
