Recording
70
DVQX1356 (ENG)
Recording Motion Pictures Using a Connected
External Device
You can connect the camera’s [HDMI] socket and an external monitor or recorder with an
HDMI cable. HDMI output is controlled separately for recording and playback. This section
describes the HDMI output control for recording.
• Playback signals are output using the [HDMI Mode (Play)] setting in [TV Connection] of the
[Setup] menu.
• Use a “High Speed HDMI cable” with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long)
∫ Attaching the cable holder
The cable holder prevents the HDMI cable or USB connection cable from getting
disconnected by accident and the [HDMI] or USB socket from being damaged.
• Example: Attaching to an HDMI cable
1 While pushing A (1), slide the clamp
portion of the cable holder to remove it
(2).
2 Loosely mount the cable holder to the
mount on the camera (3), and rotate the
screws in the direction of the arrows to
secure the cable holder (4, 5).
• Place the camera on a stable surface before performing the work.
3 Attach the HDMI cable to the clamp
portion (6).
4 Slide the clamp portion to attach it to
the cable holder (7).
External monitor/recorder (HDMI output during recording)
A [HDMI] socket (Type A)
B HDMI cable
C External recorder
D External monitor
DC-GH5SPP-DVQX1356_eng.book 70 ページ ２０１７年１２月１２日 火曜日 午後４時５１分
To Next Page
Loading...
