5. 4K Photo and Drive Settings
120
∫ Setting Pre-Burst Recording ([4K Burst]/[4K Burst(S/S)])
The camera starts recording approximately 1 second before the shutter button is pressed
fully, so you will not miss a photo opportunity.
Settings: [ON]/[OFF]
∫ Setting Loop Recording ([4K Burst(S/S)])
You can perform recording while deleting the oldest recorded data, allowing you to keep
on recording while waiting for a photo opportunity without replacing the card.
Settings: [ON]/[OFF]
> [Rec] > [4K PHOTO] > [Pre-Burst Recording]
• When this function is enabled, [ ] is displayed on the recording screen.
• Auto Focus operation settings and menus that cannot be set while this function is in use are
the same as those during [4K Pre-Burst] operation.
Battery drainage and camera temperature
• When [4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster and the
camera temperature rises. Use these functions only when recording with them.
> [Rec] > [4K PHOTO] > [Loop Recording(4K PHOTO)]
• Once you start recording, the 4K burst file will be recorded and divided approximately every
2 minutes.
Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The
preceding part will be deleted.
• We recommend that you use a sufficiently charged battery or an AC adaptor (optional).
• Up to 12 hours of continuous recording is possible.
• When this function is enabled, [ ] is displayed on the recording screen.
Not available in these cases:
• [Loop Recording(4K PHOTO)] is not possible when there is insufficient free space on the card.
To Next Page
Loading...
