45
2. Getting Started/Basic Operations
Rotating:
Selection of items or setting of values etc., is performed.
• The operation of rotating the control dial is illustrated as below in
these operating instructions.
Example: When rotating the control dial to the left or right:
∫ Setting the operation methods of the dial
Control Dial
> [Custom] > [Operation] > [Dial Set.]
[Assign Dial (F/SS)]
Assigns the operations of the aperture value and shutter speed
in Manual Exposure Mode.
[F SS]:
Assigns the aperture value to the front dial, and the shutter
speed to the rear dial.
[SS F]:
Assigns the shutter speed to the front dial, and the aperture
value to the rear dial.
[Rotation (F/SS)]
Changes the rotation direction of the dials for adjusting the
aperture value and shutter speed.
[]/[]
[Control Dial Assignment]
It sets the item to be assigned to the control dial while the
recording screen is displayed.
[] ([Headphone Volume])/
[/] ([Exposure / Aperture])
¢ 1
/
[] ([Exposure Comp.])/[] ([Sensitivity])/
[] ([Focus Frame Size])
¢ 2
¢1 A function that sets the aperture value is assigned when
the camera is set to Manual Exposure Mode. If it is set to a
mode other than Manual Exposure Mode, a function that
compensates the exposure is assigned.
¢2 When the Auto Focus Mode is set to [š], [ ], [ ] or
[Ø], a function that adjusts the AF area size is assigned.
When the Auto Focus Mode is set to [ ]or Manual Focus
is used, a function that changes the magnification factor of
the assist screen is assigned.
[Exposure Comp.]
Assigns the Exposure Compensation to the front dial or rear
dial so that you can directly adjust it.
[] (Front Dial)/[ ] (Rear Dial)/[OFF]
MENU
To Next Page
Loading...
