10. Using the Wi-Fi/Bluetooth function
296
1 Make a Bluetooth connection to the smartphone. (P287)
2 Operate the smartphone.
• To wake the camera from [Sleep Mode] using this function, select the following settings and
connect via Bluetooth:
– [Remote Wakeup]: [ON]
– [Auto Transfer]: [OFF]
• When the camera is turned off, even if you set [Remote Wakeup] to [ON] on the camera, it
cannot be turned on with this function.
∫ Reducing the time required to wake the camera from [Sleep Mode]
Select the smartphone function that can be used as a priority function when waking the
camera from [Sleep Mode] with a smartphone.
Preparations:
[Bluetooth] and [Remote Wakeup] are set to [ON].
Operating the shutter button with a smartphone via a Bluetooth
connection alone
Wireless connectivity required:
1 Select [ ].
2 Select [Shutter Remote Control].
3 Remotely operate the shutter button or motion picture
button of the camera.
• Read the [Help] in the “Image App” menu for further details on how to operate.
• The live view image of the camera cannot be monitored on the smartphone.
> [Setup] > [Bluetooth] > [Returning from Sleep Mode]
[Remote / Transfer
Priority]
Shortens the time required to wake the camera with
[Remote operation] or [Transfer image].
[Shutter Remote Priority]
Shortens the time required to wake the camera with
[Shutter Remote Control].
MENU
To Next Page
Loading...
