295
10. Using the Wi-Fi/Bluetooth function
∫ Changing the camera’s dial settings, etc. with your smartphone
Set either the camera or the smartphone as the priority control device to be used during
remote recording.
• The setting of this function cannot be changed while the connection is active.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [Priority of Remote Device]
[Camera]
Allows you to perform operations with both the camera and the smartphone
during remote recording.
• The camera’s dial settings, etc. cannot be changed with the smartphone.
[Smartphone]
Allows you to perform operations only with the smartphone during remote
recording.
• The camera’s dial settings, etc. can be changed with the smartphone.
• To end remote recording, press any of the buttons on the camera to turn on
the screen, and select [End].
To Next Page
Loading...
