2. Getting Started/Basic Operations
62
You can directly set an assigned function to a selected image by pressing the function
button during playback.
Example: When [Fn2] is set to [Rating¿3]
1 Press 2/1 to select the picture.
2 Press [Fn2], and then set the image as [Rating¿3].
∫ Functions that can be assigned in [Setting in PLAY mode]
• The following functions can be assigned to the button [Fn1], [Fn2], [Fn3], [Fn5] or [Fn6].
¢ Function button settings at the time of purchase.
• By default, [Off] is assigned to the buttons [Fn6].
Using the function buttons during playback
– [Wi-Fi]: [Fn1]
¢
– [LVF/Monitor Switch]: [Fn5]
¢
– [Rec / Playback Switch]
– [Slot Change]: [Fn3]
¢
– [4K PHOTO Play]
– [Delete Single]
– [Protect]
–[Rating¿1]
–[Rating¿2]
–[Rating¿3]: [Fn2]
¢
–[Rating¿4]
–[Rating¿5]
– [RAW Processing]
– [4K PHOTO Bulk Saving]
–[Copy]
– [Anamorphic Desqueeze Display]
– [HLG View Assist]
– [HLG View Assist (HDMI)]
– [LUT Monitor Display]
– [LUT HDMI Display]
– [Night Mode]
–[Off]
– [Restore to Default]
• If you assign [Slot Change], a screen will be displayed, allowing you to switch the card slot for
playback.
• If you assign [4K PHOTO Play], a screen will be displayed, allowing you to select the pictures
to be extracted from a 4K burst file and saved.
3
3
1/981/98
1/98
To Next Page
Loading...
