61
2. Getting Started/Basic Operations
¢ Function button settings at the time of purchase.
• By default, [Off] is assigned to the buttons [Fn10] to [Fn20].
– [Sound Rec Level Adj.]
– [Mic. Directivity Adjust]
– [HLG View Assist (HDMI)]
–[Color Bars]
– [WFM/Vector Scope]
– [Anamorphic Desqueeze Display]
– [HLG View Assist]
– [LUT Monitor Display]
– [LUT HDMI Display]
– [Focus Transition]
– [Silent Mode]
– [Peaking]
– [Histogram]: [Fn8]
¢
– [Guide Line]
– [Video Guide Line]
– [Zebra Pattern]
– [Monochrome Live View]
– [Constant Preview]
– [Live View Boost]
– [Rec Area]
– [Video-Priority Display]
– [Step Zoom]
– [Zoom Speed]
– [Night Mode]
– [Exposure Comp.]
– [Sensitivity]
– [White Balance]
– Each item in [White Balance]
– Each item in [Photo Style]
– [AF Mode/MF]: [Fn3]
¢
– [Rec / Playback Switch]
–[Off]
– [Restore to Default]
• With [Video Record], you can start/stop recording a motion picture in the same way as with the
motion picture button.
• When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
• When [1 Shot RAW+JPG] is set, it will record the RAW file and a fine JPEG image
simultaneously once only. It will return to original quality after recording.
• When [1 Shot Spot Metering] is set, it will record with [Metering Mode] set to [ ] (spot) once
only. It will return to original Metering Mode after recording.
• When [1 Shot “4K PHOTO”] is set, recording is performed in a specified 4K Photo Mode only
once. After the recording has finished, the camera returns to normal state.
• When [Operation Lock] is set, a certain type of operation is disabled. Set the type of operation
to be disabled in [Operation Lock Setting] in the [Custom] ([Operation]) menu.
• [Destination Slot] is available only when [Double Slot Function] is set to [Relay Rec].
• If you assign [Rec / Playback Switch], you can switch between recording and playback
modes.
To Next Page
Loading...
