9. Using Menu Functions
266
∫ How to select an image(s) after selecting [Single] or [Multi]
• When [Single] and [Multi] are not available, select an image in the same way as when [Single]
is selected.
:
[Playback] menu
• [Slide Show] (P267)
• [Playback Mode] (P268)
• [Protect] (P269)
• [Rating] (P269)
• [Title Edit] (P270)
• [Face Rec Edit] (P270)
• [RAW Processing] (P271)
• [4K PHOTO Bulk Saving] (P125)
• [4K PHOTO Noise Reduction] (P125)
• [Light Composition] (P274)
• [Clear Retouch] (P275)
• [Text Stamp] (P276)
• [Copy] (P277)
•[Resize] (P278)
• [Cropping] (P279)
• [Rotate] (P280)
• [Video Divide] (P280)
• [Time Lapse Video] (P281)
• [Stop Motion Video] (P281)
• [Rotate Disp.] (P281)
• [Anamorphic Desqueeze Display] (P197)
• [HLG View Assist] (P197)
• [LUT Monitor Display] (P281)
•[Picture Sort] (P282)
• [Delete Confirmation] (P282)
• The camera may not play back images recorded on other devices correctly, and the functions
of the camera may not be available for the images.
[Single] setting
1 Press 2/1 to select the picture.
2 Press [MENU/SET].
• If [Set/Cancel] is displayed at the right bottom of the
screen, the setting is cancelled when [MENU/SET] is
pressed again.
[Multi] setting
When a screen similar to the one on the right is displayed:
1 Press 3/4/2/1 to select the picture and then press
[MENU/SET] (repeat).
• The setting is cancelled when [MENU/SET] is pressed
again.
2 Press [DISP.] to execute.
When a screen similar to the one on the right is displayed:
Press 3/4/2/1 to select the picture, and then press
[MENU/SET] to set (repeat).
• The setting is cancelled when [MENU/SET] is pressed again.
• Pictures are displayed separately by card slot. You can switch
the displayed card by pressing [Fn3].
• You can only select images on one card at a time.
6HW
ュリヴヱハ
Fn3
2.
Fn3
6HW&DQFHO
To Next Page
Loading...
