Firmware Ver. 1.4
F-12
Applicable modes:
1 Press [ ].
2 Rotate the rear dial or front dial to select the White Balance.
Applicable modes:
Adjusts the exposure level that is the standard correct exposure for each setting item of
[Metering Mode].
Adds the adjustment value from this function to the exposure compensation value when
recording.
Settings: [Multi Metering]/[Center Weighted]/[Spot]/[Highlight Weighted]
• Can be set in the range between j1 EV and i1EV.
• For motion picture recording, [4K PHOTO], and [Post Focus], it is not possible to add an
adjustment value of a range that exceeds n3EV.
Other function additions/modifications
[AWBw] has been added to White Balance
[AWBw]
Adjusting the White Balance automatically.
• Leaves the reddish hue under an incandescent light source.
[Highlight Weighted] has been added to [Metering Mode] in the [Rec]/[Motion
Picture] menu
> [Rec]/ [Motion Picture] > [Metering Mode]
([Highlight Weighted])
This is the method used to perform measuring which focuses
on the highlighted parts of the screen to prevent
overexposure.
This is suitable for theatre photography, etc.
[Exposure Offset Adjust.] has been added to the [Custom] menu
> [Custom] > [Exposure] > [Exposure Offset Adjust.]
MENU
To Next Page
Loading...
