177
7. Recording Motion Pictures
Display images to which LUT data is applied on the screen when [Photo Style] is set to
[V-Log L].
∫ Importing LUT files
• Supported LUT data format:
– The “.vlt” format, which meets the requirements specified in the “VARICAM 3DLUT
REFERENCE MANUAL Rev.1.0”
– File names consisting of up to 8 alphanumeric characters (excluding extension)
Preparations:
• Save the LUT data in the card. Save it to the root directory (the first folder that appears when
you access the card on your computer) with the extension “.vlt”.
1 Insert the card containing the LUT data into the card slot 1.
2 Select the menu.
3 Press 3/4 to select the LUT data you want to import, and press [MENU/SET].
4 Press 3/4 to select the item to which you want to register the data, and press
[MENU/SET].
• Up to 4 pieces of LUT data can be registered.
• If you select an item containing registered data, it will be overwritten.
Displaying images to which LUT data is applied
> [Custom] > [Monitor / Display]→ [V-LogL View Assist] >
[Read LUT File]
MENU
To Next Page
Loading...
