79
3. Recording Modes
∫ Setting the type of defocus ([Miniature Effect])
1 Press 3 to display the setting screen.
• Setting screen can also be displayed by touching in order of [ ] then [ ].
2 Press 3/4 or 2/1 to move the in-focus portion.
• You can also move the in-focus portion by touching the
screen on the recording screen.
• To set the recording orientation (defocus orientation),
touch [ ].
3 Rotate the rear dial to change the size of in-focus
portion.
• The portion can also be enlarged/reduced by pinching out/
pinching in the screen.
• To reset the in-focus portion setting to the default, press [DISP.].
4 Press [MENU/SET] to set.
∫ Set the colour to leave in ([One Point Color])
1 Press 3 to display the setting screen.
• Setting screen can also be displayed by touching in order of [ ] then [ ].
2 Select the colour you want to leave by moving the
frame with 3/4/2/1.
• You can also select the colour you want to leave by
touching the screen.
• To return the frame back to the centre, press [DISP.].
3 Press [MENU/SET] to set.
• No sound is recorded in motion pictures.
• When [System Frequency] is set to [59.94Hz (NTSC)], the length of a motion picture recorded
with this effect will be approximately 1/10
th
of the actual recording time.
The available recording time displayed for this effect will be approximately 10 times longer
than the corresponding time displayed for normal motion picture recording.
When [System Frequency] is set to [50.00Hz (PAL)] or [24.00Hz (CINEMA)], the length of a
motion picture recorded with this effect will be approximately 1/8
th
of the actual recording time.
The available recording time displayed for this effect will be approximately 8 times longer than
the corresponding time displayed for normal motion picture recording.
• If you end motion picture recording after a short time, the camera may go on recording for a
certain period.
• Depending on the subject, the set colour may not be left in.
To Next Page
Loading...
