193
DVQP1288
Using Menu Functions
Menu list
[Expo.Meter]
Enabling/disabling the exposure meter display.
Exposure meter
●
When you set this function to [ON], an exposure meter is displayed
during Programme Shift, aperture setting, and shutter speed
operation.
●
Proper exposure is not possible in the range indicated in red.
●
If the exposure meter is not displayed, press the [DISP.] button to
switch the display of the monitor.
●
The exposure meter will turn off if no operation is performed for
approximately 4 seconds.
15 30 60 125 250
8.04.0 5.6
[Dial Guide]
Enabling/disabling the operation guide display when switching
recording modes.
Example
[Rec Area]
Switching the angle of view setting used for recording still pictures and motion pictures.
●
The recording area indicated is an approximation.
●
[Rec Area] is not available for 4K photo recording or recording in [Post Focus].
[Remaining Disp.]
Switching the display between the number of recordable pictures that you can take and
the available recording time.
→ [Custom]
To Next Page
Loading...
