108
DVQP1288
Focus, Brightness (Exposure) and Colour tone Settings
Setting the ISO Sensitivity
Recording mode:
Set ISO sensitivity (sensitivity to lighting).
We recommend higher settings to take clear pictures in darker locations.
→ [Rec] → [Sensitivity]
1
Select the ISO sensitivity by rotating the
control dial
ISO sensitivity
AUTO
ISO sensitivity is automatically set in a range up to 3200 (with the flash
on: 1600) depending on the brightness of a subject.
*
1
(Intelligent ISO)
ISO sensitivity is automatically set in a range up to 3200 (with the flash
on: 1600) depending on the movement and brightness of a subject.
*
1
• The shutter speed is not fixed when the shutter button is pressed
halfway. It is continuously changing to match the movement of the
subject until the shutter button is pressed fully.
From 80 to 3200,
H.6400
*
2
ISO sensitivity is fixed at the selected setting.
*
1
When [ISO Limit Set] (→178) is set, the ISO sensitivity is automatically set in the range up to
the [ISO Limit Set] setting value.
*
2
Only when [Extended ISO] is [ON].
2
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
To Next Page
Loading...
Need help?
General
