199
DVQP1288
Using Menu Functions
Menu list
[Monitor Display] / [Viewfinder]
Adjust brightness and colour of the monitor or viewfinder.
[Brightness] Adjusts the brightness.
[Contrast] Adjusts the contrast.
[Saturation] Adjusts the vividness of colours.
[Red Tint] Adjusts red hues.
[Blue Tint] Adjusts blue hues.
●
It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in
use.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
[Monitor Luminance]
Sets the monitor brightness according to the ambient light level.
(Auto)
The brightness is adjusted automatically depending on how bright it is
around the camera.
(Mode 1) The brightness is increased.
(Mode 2) The brightness is standard.
(Mode 3) The brightness is decreased.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
●
[ ] returns to ordinary brightness if there is no operation for 30 seconds when recording. (Press
any button or touch the screen to make the screen brighter again.)
●
Setting [ ] or [ ] reduces the operating time.
●
Cannot select [ ] during playback.
●
When the AC adaptor (optional) and DC coupler (optional) are used, the initial setting is [ ].
→ [Setup]
To Next Page
Loading...
Need help?
General
