- 85 -
Recording
For details on [Rec] Mode menu settings, refer to P34.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
∫ Applicable modes:
·¿
∫ Settings: [ON]/[OFF]
Note
•
The stabilizer function may not be effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In Digital Zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [ON] in [Self Portrait] in Scene Mode.
• The setting is fixed to [OFF] in [Starry Sky] in Scene Mode.
For details on [Rec] Mode menu settings, refer to P34.
You can take a picture with date and time of recording.
∫ Applicable modes:
·¿
∫ Settings
Note
•
Date information for pictures recorded with the [Date Stamp] set cannot be deleted.
• When printing pictures with [Date Stamp] at a shop or with a printer, the date will be
printed on top of the other if you choose to print with the date.
• If the time has not been set, you cannot stamp with the date information.
• The setting is fixed to [OFF] in the following cases.
– In [Panorama Assist], [Hi-Speed Burst] and [Flash Burst] in Scene Mode
– [Burst] in [Rec] Mode menu
• [Text Stamp], [Resize], and [Cropping] cannot be set for pictures recorded with [Date Stamp]
set.
• Even if you take a picture with [Date Stamp] set to [OFF], it is possible to stamp dates onto the
recorded pictures using [Text Stamp] (P93) or setup the Date print (P99, 112)
For details on [Rec] Mode menu settings, refer to P34.
Note
•
Refer to P18 for details.
[Stabilizer]
[Date Stamp]
[ ] ([W/O Time]) Stamp the year, month, and day.
[ ] ([With Time]) Stamp the year, month, day, hour, and minutes.
[OFF]
—
[Clock Set]
To Next Page
Loading...
