- 77 -
Recording
∫ Setting up [ ] (AF Tracking)
Bring the subject to the AF tracking frame, and press 4.
A AF tracking frame
• AF area will be displayed in yellow when a subject is recognised, and
focus will automatically adjust continuously following the subject’s
movement (Dynamic tracking).
• AF tracking is turned off when 4 is pressed again.
Note
• Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different
subject depending on the recording conditions such as the ones below.
– When the subject is too small
– When the recording location is too dark or bright
– When the subject is moving too fast
– When the background has the same or similar colour to the subject
– When jitter is occurring
– When using the zoom
• If it fails to lock, AF area will flash in red, and disappear. Press 4 again.
• AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [Ø] in [AF Mode] in that case.
• It cannot be set to [ ] in the following conditions.
– In [Panorama Assist], [Pin Hole], [Film Grain], or [High Dynamic] in Scene Mode
– In [B/W], [SEPIA], [COOL], or [WARM] in [Color Mode]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
