- 97 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
Select [Protect] on the [Playback] Mode menu. (P35)
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Cancelling all the [Protect] settings
1 Select [Protect] on the [Playback] Mode menu.
2 Press 3/4 to select [CANCEL] and then press [MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
• The protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
[Protect]
Select the picture, and then press
[MENU/SET].
• The settings are cancelled when
[MENU/SET] is pressed again.
• Exit the menu after it is set.
[SINGLE] [MULTI]
Press 2/1 to
select the picture.
Press 3/4/2/1
to select the
pictures.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
