26 VQT2X53 (ENG) (ENG) VQT2X53 27
Setting the menuSetting the Clock
Refer to the procedure example below when operating the [SETUP]
menu, [REC] menu and [PLAYBACK] menu.
Example: Setting [LCD MODE] from [OFF] to in the [NORMAL
PICTURE] Mode
Press [MENU/SET] to display the menu
Switching to the [SETUP] menu
1 Press ◄.
2 Press ▼ to select the [SETUP] menu
icon [
].
3 Press ►.
• Select a menu item next and set it.
Press ▲▼ to select [LCD MODE]
and then press ►
• Depending on the item, its setting may not
appear or it may be displayed in a different
way.
Press ▲▼ to select and then
press [MENU/SET] to set
Press [MENU/SET] to close the
menu
The Clock is not set when the camera is shipped.
Press the Power button ( )
[PRECAUTIONS] is displayed.
Press ◄ to select [YES], and
then press [MENU/SET] ( )
Press ◄► to check the
waterproof precautions, and at
the final screen (11/11), press
[MENU/SET]
Press [MENU/SET]
Press ◄► to select the items (year, month,
day, hour, minute, display order or time display
format), and press ▲▼ to set
• To cancel → Press .
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• T
o return to the previous screen, press .
• Turn on the power again and check the time display.
■
To change time setting
Select [CLOCK SET] from [REC] or [SETUP] menu, perform and .
To Next Page
Loading...
