16 VQT2X53 (ENG) (ENG) VQT2X53 17
Camera care and the waterproof
performance
(Continued)
Remove adhered foreign objects with the supplied brush
: Brush (supplied)
Long brush Short brush
Use to remove
substances such
as fine or dry
sand.
Use to remove
large foreign
objects, and
substances such
as wet sand.
: Card/
Battery door
: Terminal cover
●
Handling the brush
• Before using the brush, make sure that no foreign objects are
adhered to it.
• After using the brush, clean it by removing any adhered foreign
objects.
■
Example of foreign objects on the inner side of the card/
battery door
: Rubber seal contact
area
(around the card/
battery compartment)
: Rubber seal area
(around the card/
battery door)
■
Example of foreign objects on the inner side of the
terminal cover
: Rubber seal contact area
(around the connection
socket)
: Rubber seal area
(around the terminal cover)
●
If liquid is adhered, wipe it off with a soft and dry cloth.
●
Foreign objects may also adhere to the grooves on the side of a rubber
seal or at its corners. Clean with a brush.
To Next Page
Loading...
