Panasonic LUMIX DMC-FT2 User Manual

17
(ENG) VQT2M41
∫ This unit incorporates drain design
This unit incorporates drain design, draining
water in gaps in the camera [OFF/ON] button
and zoom lever etc. As a result of this, bubbles
may come out when you soak the unit in water,
but it is not a malfunction.
•
Water droplets may attach to the card or the battery when the card/battery door
is opened without fully drying the camera after it is used underwater or soaked in
fresh water. Be sure to wipe off the water with a soft dry cloth in such cases.
• Do not open or close the card/battery door and terminal cover with droplets of
water still on the camera. The water droplets may seep into the camera, causing
condensation or failure.
Note
•
Wipe off the water and dirt on the camera with a dry soft cloth.
• Do not leave the camera uncared for more than 60 minutes after using it
underwater. It may cause deterioration of the waterproof performance.
• After use at the seaside or under water, make sure that the card/battery door
and terminal cover are firmly closed and soak the unit in fresh water pooled in a
shallow container for 10 minutes or less.
• If the zoom lever, mode dial, or camera [OFF/ON] button do not move smoothly,
it may be caused by an adhesion of foreign objects. Using in such a state may
cause malfunctions, such as locking up, so wash off any foreign objects by
shaking the camera in fresh water. Confirm that the zoom lever, mode dial, and
camera [OFF/ON] button move smoothly after cleaning.
• After soaking or washing the unit, wipe off water drops with a dry soft cloth and
dry the unit in a shaded area which is well ventilated.
• Make sure that water is completely drained from the unit after soaking in water
by standing the unit on a dry cloth for a while.
• Do not dry the camera with hot air from dryer or similar. Waterproof performance
will deteriorate due to deformation.
• Do not use chemicals such as benzine, thinner, alcohol, or cleanser, or soap or
detergents.
• Example of water droplets around card/battery slot.
A: Water droplet
B:Battery
C:Card
DMC-FT2&TS2EB-VQT2M41_eng.book 17 ページ ２０１０年１月２９日 金曜日 午後７時５９分

Panasonic LUMIX DMC-FT2 Specifications

General

Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.33 \
Supported aspect ratios	3:2, 4:3, 16:9
Maximum image resolution	4320 x 3240 pixels
Still image resolution(s)	1024 x 768, 2048 x 1536, 2592 x 1944, 3072 x 2304, 3648 x 2056
Digital zoom	4 x
Optical zoom	4.6 x
Combined zoom	39.3 x
Focal length range	4.9 - 22.8 mm
Interface	USB
Digital SLR	No
Power supply type	AC
Aperture range (F-F)	3.3 - 5.9
Camera shutter speed	15 - 60, 1.0 s
Effective sensor resolution	14.1 pixels
Focal length (35mm film equivalent)	28 - 128 mm
Focus adjustment	Auto
Normal focusing range	0.3 - ∞ m
Flash modes	auto, Red-eye reduction, Slow synchronization
Flash range (tele)	0.3 - 2.8 m
Flash range (wide)	0.3 - 5.1 m
Internal memory	40 MB
Compatible memory cards	sd, sdhc, sdxc
Motion JPEG frame rate	30 fps
Maximum video resolution	1280 x 720 pixels
Field of view	100 %
USB version	2.0
Product color	Orange
Waterproof up to	10 m
Scene modes	beach, Candlelight, Children, Close-up (macro), Fireworks, Night portrait, party (indoor), Portrait, self-portrait, Sports, Sunset, Underwater
Image editing	resizing, trimming
Photo effects	black&white, Sepia
White balance	auto, Cloudy, custom modes, daylight, Shade
Camera playback	movie, slide show, thumbnails
Battery capacity	940 mAh
Power requirements	110 - 240V
Battery life (CIPA standard)	360 shots

Weight and Dimensions

Depth	24.3 mm
Width	99.3 mm
Height	63.1 mm
Weight	188 g