Panasonic LUMIX DMC-FT2 User Manual

VQT2M41 (ENG)
8
(Important) About the waterproof/
dustproof and anti-shock performance of
the camera
• Please observe the following precautions, and avoid using this camera in any
situation where the camera is subject to high water pressure. This camera’s
waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings.
Provided the care and maintenance guidelines described in this document are
strictly followed, this camera can operate underwater, to a depth not exceeding
10 m (33 feet) for a time not exceeding 60 minutes.
¢1
• This camera also complies with “MIL-STD 810F (Method 516.5-Shock)”. The
camera has cleared a drop test from a height of 2 m (6.6 feet) onto 3 cm
(0.10 feet) thick plywood. In most cases this camera should not sustain any
damage if dropped from a height not exceeding 2 m (6.6 feet).
¢2
• Supplied accessories are not waterproof (excluding hand strap/silicon jacket).
¢1 This means that the camera can be used underwater for specified time in
specified pressure in accordance with the handling method established by
Panasonic. This does not guarantee no destruction, no malfunction, or
waterproofing in all conditions.
¢2 This does not guarantee no destruction, no malfunction, or waterproofing in all
conditions.
Observe the following precautions and avoid using under water pressure
exceeding the guaranteed performance, and in an environment with
excessive dust or sand.
Waterproofing is not guaranteed if the unit is subject to an impact as a result
of being hit or dropped etc.
If an impact to the camera occurs, it should be inspected (subject to a fee) by
a Panasonic’s service centre to verify that the waterproofing is still effective.
Any malfunction caused by customer misuse, or mishandling will not be
covered by the warranty.
Note
•
The picture can become whitish if there is dirt e.g. fingerprints on the lens.
When it is dirty, lightly wipe the surface of the lens with soft and dry cloth.
DMC-FT2&TS2EB-VQT2M41_eng.book 8 ページ ２０１０年１月２９日 金曜日 午後７時５９分

Panasonic LUMIX DMC-FT2 Specifications

General

Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.33 \
Supported aspect ratios	3:2, 4:3, 16:9
Maximum image resolution	4320 x 3240 pixels
Still image resolution(s)	1024 x 768, 2048 x 1536, 2592 x 1944, 3072 x 2304, 3648 x 2056
Digital zoom	4 x
Optical zoom	4.6 x
Combined zoom	39.3 x
Focal length range	4.9 - 22.8 mm
Interface	USB
Digital SLR	No
Power supply type	AC
Aperture range (F-F)	3.3 - 5.9
Camera shutter speed	15 - 60, 1.0 s
Effective sensor resolution	14.1 pixels
Focal length (35mm film equivalent)	28 - 128 mm
Focus adjustment	Auto
Normal focusing range	0.3 - ∞ m
Flash modes	auto, Red-eye reduction, Slow synchronization
Flash range (tele)	0.3 - 2.8 m
Flash range (wide)	0.3 - 5.1 m
Internal memory	40 MB
Compatible memory cards	sd, sdhc, sdxc
Motion JPEG frame rate	30 fps
Maximum video resolution	1280 x 720 pixels
Field of view	100 %
USB version	2.0
Product color	Orange
Waterproof up to	10 m
Scene modes	beach, Candlelight, Children, Close-up (macro), Fireworks, Night portrait, party (indoor), Portrait, self-portrait, Sports, Sunset, Underwater
Image editing	resizing, trimming
Photo effects	black&white, Sepia
White balance	auto, Cloudy, custom modes, daylight, Shade
Camera playback	movie, slide show, thumbnails
Battery capacity	940 mAh
Power requirements	110 - 240V
Battery life (CIPA standard)	360 shots

Weight and Dimensions

Depth	24.3 mm
Width	99.3 mm
Height	63.1 mm
Weight	188 g