VQT1P09
18
Preparation
∫ Functions that cannot be set or will not work under some conditions
Due to the camera’s specifications, it may not be possible to set some of the functions or some
functions may not work in some of the conditions under which the camera is used.
For details, refer to P103.
This section describes how to select the normal picture mode settings, and the same setting can
be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the normal picture mode
Setting menu items
Turn the camera on.
A [MENU/SET] button
B [REC]/[PLAYBACK] selector switch
C Mode dial
Slide the [REC]/[PLAYBACK] selector
switch to [!].
• When selecting the [PLAYBACK] mode menu
settings, set the [REC]/[PLAYBACK] selector switch to
[(], and proceed to step
4.
Set the mode dial to [·].
Press [MENU/SET] to display the menu.
• You can switch menu screens from any menu item by
rotating the zoom lever.
1
2
3
ONOFF
A
C
B
4
/SET
MENU
DMC-FX35P_mst.book 18 ページ ２００８年１月１５日 火曜日 午前１０時３６分
To Next Page
Loading...
