VQT1P09
48
Advanced (Recording pictures)
∫ Technique for Candle light mode
•
This is more effective when taking pictures without using the flash.
• We recommend using a tripod and the self-timer for taking pictures.
Note
•
The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/50 cm (1.64 feet)
(Tele) to ¶]
• The initial setting for [AF MODE] is [š].
This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it
is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select to
have these appear at the time of playback, or have them stamped on the recorded image using
[TEXT STAMP] (P78).
∫ Birthday/Name setting
1 Press 3/4 to select [AGE] or [NAME] and then press 1.
2 Press 3/4 to select [SET] and then press [MENU/SET].
3 Enter the birthday or name.
Birthday:
2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the [TITLE EDIT] section on P77.
•
When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4 Press [MENU/SET] to finish.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.
Note
•
The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled software
on the CD-ROM (supplied).
• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
• The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/50 cm (1.64 feet)
(Tele) to ¶]
• [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].
• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
• If the age is not properly displayed, check the clock and birthday settings.
• The birthday setting and name setting can be reset with [RESET].
• The initial setting for [AF MODE] is [š].
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet’s birthday and name. You can select to have these appear at the time of
playback, or have them stamped on the recorded image using [TEXT STAMP] (P78).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P48.
Note
•
The initial setting for the AF assist lamp is [OFF].
• [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].
• The initial setting for [AF MODE] is [Ø].
• Refer to [BABY1]/[BABY2] for other information about this mode.
: [BABY1]/; [BABY2]
í [PET]
DMC-FX35P_mst.book 48 ページ ２００８年１月１５日 火曜日 午前１０時３６分
To Next Page
Loading...
