Advanced (Playback)
- 146 -
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu. (P23)
Touch [EXIT] to return to the menu screen.
• Touch [EXIT] to close the menu.
∫ Cancelling all the [PROTECT] settings
1 Touch [CANCEL] on the screen shown in step 2.
2 Touch [YES].
3 Touch [EXIT] to close the menu.
•
If you touch [CANCEL] while cancelling protection, the cancelling will stop halfway.
Note
•
The protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
[PROTECT]
Touch [SINGLE] or [MULTI].
Select the picture.
[SINGLE] setting
Drag the screen horizontally to
select an image, and then touch
[SET].
•
You can forward or rewind pictures
continuously by keeping your finger on
the left or right sides of the screen after
forwarding/rewinding a picture.
(Pictures are displayed reduced in size)
• Setting is cancelled by touching
[CANCEL].
[MULTI] setting
Touch the picture you wish to
protect.
•
Switch the screen by touching [3]/[4]
if these are displayed on the slide bar.
• Setting is cancelled by touching the
same picture again.
[SINGLE] [MULTI]
To Next Page
Loading...
