Connecting to other equipment
- 132 -
Selecting a single picture and printing it
Drag the screen horizontally to select an
image, and then touch [Print].
Touch [Print start].
• Refer to P133 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
Touch [Multi Print].
Touch the item.
• If the print check screen has appeared, select [Yes], and print the pictures.
Item Description of settings
[Multi Select]
Multiple pictures are printed at one time.
• Select the picture you wish to print. (Touch the same picture again to
cancel the selection)
• After the pictures have been selected, touch [Set].
[Select All] Prints all the stored pictures.
[Print Set (DPOF)] Prints the pictures set in [Print Set] only. (P108)
[Favorite] Prints the pictures set as favorites only. (P107)
Touch [Print start].
• Refer to P133 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
To Next Page
Loading...
