Panasonic Lumix DMC-FX78 - [Quality]

Recording
- 76 -
Note
•
A digital picture is made of numerous dots called pixels. The higher the numbers of pixels, the
finer the picture will be when it is printed on a large piece of paper or displayed on a PC
monitor.
• If you change the aspect ratio, set the picture size again.
• The Extended Optical Zoom does not work in the following cases so the picture size for [ ] is
not displayed.
– In [Motion Deblur] in Intelligent Auto Mode
– In Macro Zoom Mode
– In [Transform], [Handheld Night Shot], [High Sens.], [Hi-Speed Burst], [Flash Burst] or
[Photo Frame] in Scene Mode
– In 3D Photo Mode
– In [Pin Hole] in My Color Mode
– When recording motion pictures
• Pictures may appear in mosaic depending on the subject and the recording conditions.
• The setting is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9), 2.5M (1:1) in [Transform] in Scene Mode.
• The setting is fixed to 2M (4:3) in [Photo Frame] in Scene Mode.
For details on [Rec] Mode menu settings, refer to P36.
Set the compression rate at which the pictures are to be stored.
Applicable modes:
·¿
Note
•
The setting is fixed to [›] in [Transform], [Handheld Night Shot], [High Sens.],
[Hi-Speed Burst] or [Flash Burst] in Scene Mode.
• The following icons are displayed during the 3D recording.
[Quality]
[A] Fine (when giving priority to the picture quality)
[›] Standard (when using the standard picture quality and increasing the number of
pictures to be recorded without changing the number of pixels)
[]:MPOiFine (
Both MPO images and fine JPEG images are recorded
simultaneously.
)
[]:MPOiStandard (
Both MPO images and standard JPEG images are recorded
simultaneously.
)