EasyManuals Logo

Panasonic Lumix DMC-FX78 Owner's Manual

Panasonic Lumix DMC-FX78
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
- 145 -
Others
[Memory card parameter error]/[This memory card cannot be used]
> Use a card compatible with this unit. (P13)
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[Read Error/Write Error
Please check the card]
It has failed to read or write data.
> Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
The card may be broken.
> Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures in
[AVCHD].
Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures
in [Motion JPEG].
In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P45).
Depending on the type of the card, motion picture recording may stop in the middle.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P45)
> Insert a different card.
[A folder cannot be created]
A folder cannot be created because there are no remaining folder numbers that can be used.
> Format the card after saving necessary data on a PC etc. (P45) If you execute [No.Reset]
in the [Setup] menu after formatting, the folder number is reset to 100. (P42)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P43)
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P128,
131)

Table of Contents

Other manuals for Panasonic Lumix DMC-FX78

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-FX78 and is the answer not in the manual?

Panasonic Lumix DMC-FX78 Specifications

General IconGeneral
BrandPanasonic
ModelLumix DMC-FX78
CategoryDigital Camera
LanguageEnglish

Related product manuals