Recording
- 48 -
∫ Setting up [ ] (AF Tracking)
•
When the AF lock fails, the Tracking AF frame will flash in red and then disappear. Redo the AF
lock.
• AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [ ] in [AF Mode] in that case.
• AF Tracking is canceled when the Touch Shutter is set to [ ].
• It cannot be set to [ ] in the following conditions
–In [Panorama Assist], [Starry Sky] and [Fireworks] in Scene Mode.
–In [Monochrome], [High Dynamic], [Pin Hole] and [Film Grain] in My Color Mode
–In [B/W], [SEPIA], [COOL], or [WARM] in [Color Mode].
• Failure of AF lock may occur depending on the recording conditions in the following cases.
–When the subject is too small
–When the recording location is too dark or bright
–When the subject is moving too fast
–When another subject or background is similar in color to the subject
–When jitter is occurring
–When using the zoom
Note
•
Touch operation is not possible at the top right of the LCD monitor even if image is displayed.
To Next Page
Loading...
