45
9.2.2. Flash-Rom Data Backup
When trouble occurs, it is recommended to backup the Flash-rom data before disassembling the unit.
[ ROM_BACKUP (Method of Non-PC backup) ]
1. Insert the SD memory card into the camera.
2. Set the camera to “Temporary cancellation of the initial settings”.
3. Select the “SETUP” menu.
From the “SETUP” menu, select “ROM BACKUP”.
NOTE:
This item is not listed on the customer’s “SETUP” menu.
4. When this “ROM_BACKUP” item is selected, the following submenus are displayed.
9.2.3. Light Box
If using VFK1164TDVLB Light Box, remove the lens connection
ring by loosing three hexagon screws.
To Next Page
Loading...
