Recording pictures (basic)
32
∫ Program AE
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
• Insert the charged battery. (P15)
• Insert the card. (P16)
• Remove the lens cap.
1 1 Turn the camera on.
2 Set the mode dial to program
AE mode [ ].
• The power indicator (green) lights.
When it blinks, the remaining battery
power is low. Insert a fully charged
battery.
2 Aim the AF area 1 to the point
you want to focus and then press
the shutter button halfway.
• A: Press the shutter button halfway to
focus.
• The focus indication 2 is lit and then
the aperture value 3 and the shutter
speed 4 are displayed.
3 Take a picture.
• B: Press the shutter button fully to take
the picture.
OFF ON
M
S
A
SCN
P
1/25F2.8
When the
subject is not
focused
When the
subject is
focused
Focus
indication
Blink (green) On (green)
AF area Turns from
white to red
Tu r ns from
white to green
Sound Beeps 4 times Beeps 2 times
1/25F2.8
FZ3-PP.book 32 ページ ２００４年６月２１日 月曜日 午後７時６分
To Next Page
Loading...
Need help?
General
