Recording pictures (basic)
47
Taking Pictures using Burst Mode
1 Switch the burst mode setting to
record pictures.
: High speed
;
: Low speed
;
:No limit
;
No display (canceled)
∫ Number of pictures recorded in burst
mode
¢When the shutter speed is higher than
1/60 and the flash is not activated
• In simple mode [ ], the burst speed is
fixed to Low. (P36)
• Keep pressing the shutter button fully to
activate the burst mode.
• If the flash is activated, you can record
only 1 picture.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
• You cannot take pictures with audio in the
burst mode.
• You cannot take pictures in the burst
mode when the quality is set to [TIFF].
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed by default.
• When the burst mode setting is set to no
limit, the speed of taking pictures
becomes slow during a recording in burst
mode.
• Burst mode will not perform as described
if a MultiMediaCard is used in place of an
SD Memory Card. The reading/writing
speed of a MultiMediaCard is slower than
that of an SD Memory Card.
2016
19
Burst speed
(pictures/
second)¢
Number of recordable
pictures (pictures)
4 max. 7 max. 13
2 max. 7 max. 13
2
Depends on
the card
capacity
Depends on
the card
capacity
FZ3-PP.book 47 ページ ２００４年６月２１日 月曜日 午後７時６分
To Next Page
Loading...
Need help?
General
