VQT2G40 (ENG)
18
Preparation
Setting the Menu
This camera offers menu selections that allow you to customize its operation to maximize
your picture taking experience.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
This section describes how to select the Program AE Mode settings, and the same setting
can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [Ø] to [š] in the Program AE Mode
•
3/4/2/1 in the steps can be operated with the joystick too.
Turn the camera on.
A [MENU/SET] button
B [REC]/[PLAYBACK] selector switch
C Mode dial
Slide the [REC]/[PLAYBACK] selector
switch to [!].
• When selecting the [PLAYBACK] Mode menu
settings, set the [REC]/[PLAYBACK] selector switch
to [(], and proceed to step
4.
Set the mode dial to [ ].
Setting menu items
Press [MENU/SET] to display the menu.
• You can switch menu screens from any menu item by
rotating the zoom lever.
DMC-FZ38&FZ35P-VQT2G40_eng.book 18 ページ ２００９年６月３０日 火曜日 午後６時３３分
To Next Page
Loading...
Need help?
General
