Advanced (Recording pictures)
- 144 -
For details on [REC] Mode menu settings, refer to P27.
Setting colour effects for the recorded pictures.
Applicable modes:
Note
•
When in Intelligent Auto Mode, only [OFF], [B/W] and [SEPIA] can be set.
• The Intelligent Auto Mode is set separately from the other Recording Modes.
• [COLOR EFFECT] becomes disabled when Colour Bracket is set.
For details on [REC] Mode menu settings, refer to P27.
Adjusting the picture quality for the recorded pictures.
Applicable modes:
Note
•
When you take pictures in dark places, picture noise may become noticeable. If picture noise
becomes a problem, we recommend that you take pictures after increasing the setting for
[NOISE REDUCTION] or lowering the setting for each of the items other than
[NOISE REDUCTION].
[COLOR EFFECT]
[OFF]: This is the standard setting.
[B/W]: The picture becomes black and white.
[SEPIA]: The picture becomes sepia.
[COOL]: The picture becomes bluish.
[WARM]: The picture becomes reddish.
[PICT. ADJ.]
[CONTRAST]:
[r]: Increases the difference between the brightness and the darkness in the picture.
[s]: Decreases the difference between the brightness and the darkness in the picture.
[SHARPNESS]:
[r]: The picture is sharply defined.
[s]: The picture is softly focused.
[SATURATION]:
[r]: The colours in the picture become vivid.
[s]: The colours in the picture become natural.
[NOISE REDUCTION]:
[r]: The noise reduction effect is enhanced.
Picture resolution may deteriorate slightly.
[s]: The noise reduction effect is reduced.
You can obtain pictures with higher resolution.
To Next Page
Loading...
