Advanced (Recording pictures)
- 78 -
[REC] Mode:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Press [˜/‚] to display the Burst Mode selection
menu, and then press 3/4 to select the Burst
Mode.
A [˜/‚] button
Press [MENU/SET].
• You can also press the shutter button halfway to finish.
• The menu screen disappears after about 5 seconds. At this time,
the selected item is automatically set.
Take a picture.
• Hold down the shutter button fully to activate the Burst Mode.
¢ The burst speed is constant regardless of the transfer speed of the card.
•
The burst speed values given above apply when the shutter speed is 1/60 or faster and
when the flash is not activated.
[OFF] ˜
Burst speed (pictures/
second)
—approx. 2.3
¢
Number of
recordable
pictures
A —max. 3
› —max. 5
A
To Next Page
Loading...
