Advanced (Recording pictures)
- 86 -
[REC] mode:
Taking pictures while adjusting colour
(My colour mode)
Easily confirm the subject on the LCD monitor or viewfinder and adjust the colour,
brightness, or saturation before taking a picture.
Set the mode dial to [ ].
Press 2/1 to select an item and press 3/4 to
adjust the item.
• Description of adjustment is displayed by pressing [DISPLAY]. (It will return to selection
screen when it is pressed again.)
Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
• Recording screen is displayed.
∫ Return My colour settings to default
1 Select [RESET] in above step 2.
2 Press 3 to select [YES] and press [MENU/SET].
•
Adjusted value for each item returns to standard (centre point).
Item Adjustment contents
[COLOR]
This will adjust the colour of the
image from red light to blue light.
(11 steps in n5)
[BRIGHTNESS]
This will adjust the brightness of
the image. (13 steps in n6)
[SATURATION]
This will adjust the colour
intensity of the image from black
and white to vivid colour.
(11 steps in n5)
[RESET] Return all settings to default
To Next Page
Loading...
