- 141 -
Recording
[POWER ZOOM LENS]
This may only be selected when using a lens that is compatible
with power zoom (electrically operated zoom). (For compatible
lenses, please refer to our website)
[DISP FOCAL LENGTH]:
When you zoom, the focal distance is
displayed and you can confirm the
zoom position.
A Current focal distance
[OFF]/[ON]
[e.g.: When the
interchangeable lens
(H-PS14042) is used]
[STEP ZOOM]:
When you operate the zoom with this
setting [ON], the zoom will stop at
positions corresponding to
predetermined distances.
•
[STEP ZOOM] is disabled during motion
picture recording.
[OFF]/[ON]
[e.g.: When the
interchangeable lens
(H-PS14042) is used]
[ZOOM RESUME]:
When you switch the power switch [ON], the zoom positions when
you last switched [OFF] are automatically restored.
[OFF]/[ON]
[ZOOM SPEED]:
You can set the zoom speed for zoom lever operations.
•
If you set [STEP ZOOM] to [ON], the zoom speed will not change.
[PHOTO]:
[H] (High speed), [M] (Middle speed), [L] (Low speed)
[VIDEO]:
[H] (High speed), [M] (Middle speed), [L] (Low speed)
[ZOOM RING]:
This may only be selected when a power zoom-compatible lens
with a zoom lever and zoom ring is attached. When set to [OFF],
the operations controlled by the zoom ring are disabled to prevent
accidental operation.
[OFF]/[ON]
[LVF DISP.STYLE]
This will set the display style of the viewfinder.
[]: Viewfinder style
[]: LCD monitor style
[LCD DISP.STYLE]
This will set the display style of the LCD monitor.
[]: Viewfinder style
[]: LCD monitor style
[¦
BUTTON SWITCH]
It is possible to set how the [¦] button to toggle to Intelligent
Auto Mode will operate.
[SINGLE PRESS]:
It will switch to Intelligent Auto Mode by pressing [¦].
[PRESS AND HOLD]:
It will switch to Intelligent Auto Mode by pressing [¦] for a while.
14 42
mm
To Next Page
Loading...
Need help?
General
Weight and Dimensions
