- 69 -
Recording
Recording Mode:
Recording
Optical Image Stabilizer
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
The interchangeable lens (H-FS014042, H-FS045200 or H-PS14042) has a stabilizer
function.
•
There is an [O.I.S.] switch on the interchangeable lens (H-FS045200).
• There is no [O.I.S.] switch on the interchangeable lens (H-FS014042 or H-PS14042). Set the
[STABILIZER] settings in the [REC] Mode menu.
∫ Setting the Stabilizer in the [REC] Mode menu
1 Select [STABILIZER] in the [REC] Mode menu. (P56)
2 Press 3/4 to select the setting and then press [MENU/SET].
¢ This item cannot be set in the Intelligent Auto Mode.
•
The [STABILIZER] feature is only available if the lens you are using has an internal
stabilizer.
• Exit the menu after it is set.
When using a lens with an [O.I.S.] switch, it is
possible to set to enable the Optical Image Stabilizer
by switching the [O.I.S.] switch on the lens to [ON].
(It is set to [ ] at the time of purchase.)
Example when a lens with the
[O.I.S.] switch is mounted.
Item
Settings
[OFF]
[STABILIZER] does not work.
(This can be selected only when using a lens without the [O.I.S.]
switch.)
[]
(Normal)
Jitter is always compensated during Recording Mode.
[]
¢
(Panning)
Camera shake is corrected for up/down movements. This mode is ideal
for panning (a method of taking pictures which involves turning the
camera to track the movements of a subject which continues to move
in a fixed direction).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
