- 41 -
Basic
The brightness and colour optimally set by the camera can be easily matched to your
preferences.
This mode is useful for those who would like the settings made by the camera to match
their preferences but do not like dealing with detailed settings.
Press [MENU/SET] when in Intelligent
Auto Mode.
Select [iA MODE] and then press [MENU/SET].
Press 1 to select [ ] and then press
[MENU/SET].
1 Press the rear dial to display the setting screen.
•
Each press of the rear dial switches among brightness
setting, Defocus Control (P42) and end operation.
2 Touch the slide bar to set.
•
Setting can also be performed by rotating the rear dial.
1 Press 1 ( ) to display the setting screen.
2 Touch the slide bar to set.
•
This will adjust the colour of the image from red colour
to blue colour.
• Setting can also be performed by rotating the rear dial.
Note
•
It is also possible to record a picture by touching [ ].
• The set brightness and colour will return to the default (centre point) when the power switch is
switched [OFF] or the camera is switched to another Recording Mode.
Recording using Intelligent Auto Plus Mode
Setting brightness
Setting colour
To Next Page
Loading...
