- 179 -
Connecting to other equipment
Selecting a single picture and printing it
1 Press 2/1 to select the picture and then press
[MENU/SET].
2 Press 3 to select [PRINT START] and then press
[MENU/SET].
•
Refer to P180 for the items which can be set before starting to print
the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
1 Press 3.
2 Press 3/4 to select an item and then press [MENU/SET].
•
If the print check screen has appeared, select [YES], and print the pictures.
Item Description of settings
[MULTI SELECT]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures and then press [MENU/SET].
(When [MENU/SET] is pressed again, the setting is cancelled.)
• Once the selection is completed, press 2 a few times to select [OK],
and press [MENU/SET].
[SELECT ALL] Prints all the stored pictures.
[PRINT SET
(DPOF)]
Prints the pictures set in [PRINT SET] only. (P160)
[FAVORITE] Prints the pictures set as favourites only. (P159)
3 Press 3 to select [PRINT START] and then press [MENU/SET].
•
Refer to P180 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
100
_
0001100100
_
00010001100
_
0001
PLEASE SELECT
THE PICTURE TO PRINT
SELECTSELECT
PRINTPRINT
PictBridgePictBridgePictBridge
MULTI PRINTMULTI PRINT
OFF
1
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
SINGLE SELECT
SETSELECT
CANCEL
To Next Page
Loading...
Need help?
General
Weight and Dimensions
