- 67 -
Basic
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P170 for details.
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P166 for the method to play back 3D pictures in 3D.
• To accurately calibrate the LCD Monitor, be sure to touch precisely at the designated locations.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the
VIERA equipment by automatically coupling this unit with the
VIERA Link compatible equipment using HDMI mini cable
(optional).
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
[3D PLAYBACK]
Setup the output method for 3D pictures.
[]: Set when connecting to a 3D compatible television.
[]: Set when connecting to a television not compatible
with 3D.
Set this when you would like to view pictures in 2D
(conventional image) on a 3D compatible television.
} [SCENE MENU]
Set the screen that is displayed when the mode dial is set to .
[OFF]: The recording screen in the currently selected scene
mode appears.
[AUTO]: The scene mode selection screen appears.
[CALIBRATION]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1 Press [MENU/SET].
2 Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•
A message is displayed once the
position is set.
3 Press [MENU/SET] to finish.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
