11
3.3.3. Lens Unit (Interchangeable Lens: H-FS1442A)
3.3.3.1. About Lens Main Block Unit (Ref. 308)
1. LENS MAIN BLOCK UNIT (Ref. 308) is not supplied due to difficulty of the transportation issue (Fragile, Dust-free packing),
and requires critical lens adjustments.
Therefore, any needs of the “LENS MAIN BLOCK UNIT” (Ref. 308), carefully confirm its performance in advance.
2. Once “LENS MAIN BLOCK UNIT” (Ref. 308) is confirmed as defective, place order “LENS Unit” (Ref. 300) and replace
SHADING FRAME (Ref. 302), to maintain Serial number of owner's original lens.
Fig. S3
• When the "Ref.308" is necessary to
be
replaced, replace as a "Ref.300".
• However, replace "Ref.302", to maintain Serial number of original lens.
When a colour of camera body is KIT except
GF6KEG/GF6KEC/GF6KEF/GF6KEE/GF6KGN/GF6WEG/GF6WEC/GF6WEF/GF6WEE/GF6WGN.
a colour
of
REAR FRAME UNIT(Ref.307)
is
black.
When a colour of camera body
is
R/W
or
the
model
is
GF6KEG/GF6KEC/GF6KEF/GF6KEE/GF6KGN/GF6WEG/GF6WEC/GF6WEF/GF6WEE/GF6WGN.
a colour of REAR FRAME UNIT(Ref.307) is silver.
304
306
NOTE:
~B304
<';;;
B305
./'
-~
./~
.
-:,./
B306
-~
B307
~B301
./4'·
B302
.~B303
Keep covering the lens unit with Lens cap (front), other than necessary cases.
To Next Page
Loading...
