52
(Fig. D25)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The Screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
9.2. Disassembly and Assembly Procedure for the Lens
Please refer to the following service manuals about Disassembly and Assembly of bundled lenses.
• H-FS1442APP/E/GK: Order No.DSC1302014CE
• H-FS45150PP/E/GK: Order No.DSC1209040CE
• H-PS14042PP/E/GK: Order No.DSC1110056CE
• Battery Lock Knob
• Battery Lock Spring
• Hooking part
x 1
✓
Battery Lock Knob
NOTE: (When Replacing)
• Take care not to lose the battery lock knob and battery
lock spring,
it
because easy to separate, when remove
the battery case.
NOTE: (When Replacing)
• When remove the battery out spring, push the battery
out spring
in
the direction
of
arrow
(1
),
and then remove
the battery out spring
in
the direction of arrow (2).
To Next Page
Loading...
