28
6 Service Mode
6.1. Error Code Memory Function
1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly.
(i.e., when the unit is powered on by the battery, the battery is pulled out)
The error code is memorized to Flash-ROM when the unit has just before powered off.
2. How to display
The error code can be displayed by ordering the following procedure:
• Preparation
Attach the fully charged Battery, and insert the memory card.
• Step 1. The temporary cancellation of “INITIAL SETTINGS”:
While pressing [ PLAYBACK ] button, [ Q.MENU/Fn1 ] button and “[ RIGHT ] of Cursor buttons” simultaneously, turn the
Power on.
• Step 2. Execute the error code display mode:
Press [ PLAYBACK ] button, [ MENU/SET ] button and “[ LEFT ] of Cursor buttons” simultaneously with the step 1 condition.
The display is changed as shown below when the above buttons are pressed simultaneously.
Normal display → Error code display → Camera information display → Normal display → .....
Example of Error Code Display
History No.: • The error code can
be
memorized 16 error codes
in
sequence, however it is displayed 5 errors on the LCD.
Latest
Error
I
I
I
I
I
I
I
I
+
5th error
from
the latest
Display can be changed by the following procedure:
* "[
UP)
or [ DOWN )
of
Cursor buttons": Each time two presses, it scroll up or down by line.
* "
[LEFT]
or [ RIGHT] of Cursor buttons
":
Each time one presses, it jump up or down as shown below.
2Iines, 3Iines, 2Iines .
...
.
Error Occurred Date: •It is displayed "Year", "Month", "Day" and "Time" from the left
in
order.
*Since it is acquired from "Clock setting data" of the unit, "00000000" (default) is
displayed if the clock had not been set at the time
of
error occurred.
Detecting Device: • The Error detecting
Device/
Circuit is displayed.
8
11111111
111111111111111
111111111111111
,---------
~
·-----,
I I
~
------------------
)
*This data belong to the currently selected (Yellow highlighted) error code.
*Refer to the Error Code List
in
details.
Error code: • It consists of 8 bits data.
* Refer to the Error Code List
in
details.
---1
Y2013.JAN.26th.14Hrs. Write error.
I Y2013.JAN.14th.07Hrs. Card logic error.
I Y2013.JAN.11
th
.15Hrs. Card physical error.
Indistinctness Initialization failure error.
No error history.
Major problematic part: • Based on detected error code, major problematic part is displayed.
*This data belong to the currently selected (Yellow highlighted) error code.
*Refer to the Error Code List
in
details.
To Next Page
Loading...
