39
8.3. Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
CAUTION. (When servicing Flash Sub P.C.B. Unit)
1. Be sure to discharge the E.Capacitor on Flash Sub P.C.B. Unit.
Refer to “How to Discharge the E.Capacitor on Flash Sub P.C.B. Unit”.
The E.Capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on Flash Sub P.C.B. Unit.
3. DO NOT allow other parts to touch the high voltage circuit on Flash Sub P.C.B. Unit.
No. Parts No. Connection Form
1
VFK1950
FP9001(MAIN) ←→ MAIN-TOP FPC - TOP P.C.B. 33pin / 0.3 FFC
2 RFKZ0564 FP9002(MAIN) ←→ MOUNT BOX UNIT 23pin / 0.3 FFC
3 RFKZ0583 FP9003(MAIN) ←→ MOUNT BOX UNIT 19pin / 0.3 FFC
4 VFK1175 FP9004(MAIN) ←→ REAR OPERATION 16pin / 0.5 FFC
5 VFK1716 FP9005(MAIN) ←→ AUDIO Wi-Fi FPC UNIT 25pin / 0.3 FFC
6 VFK1480 FP9007(MAIN) ←→ POP SW FPC P.C.B. 6pin / 0.5 FFC
7 RFKZ0477 FP9008(MAIN) ←→ HINGE FPC UNIT - LCD UNIT 45pin / 0.3 FFC
8 VFK1480 FP9009(MAIN) ←→ NFC ANTENNA UNIT 6pin / 0.5 FFC
9 RFKZ0477 FP3912(MAIN) ←→ MOUNT BOX UNIT 45pin / 0.3 FFC
10 RFKZ0477 FP3913(MAIN) ←→ MOUNT BOX UNIT 45pin / 0.3 FFC
POP
SW
FPC
P.C
.B.
Flash Sub P.C.B. Unit
5
FP90
Mount Box U ·
NFC Antenna Unit
6
FP9007
FP9001
FP9008
Rear Operation
3
LCD Unit
To Next Page
Loading...
