3
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions----------------------------------------------- 4
1.1. General Guidelines---------------------------------------- 4
1.2. Leakage Current Cold Check--------------------------- 4
1.3. Leakage Current Hot Check (See Figure. 1) ------- 4
1.4. How to Discharge the E.Capacitor on Flash
Sub P.C.B. Unit--------------------------------------------- 5
2 Warning -------------------------------------------------------------- 6
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices---------- 6
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only) ---------------------------------------------------------- 6
2.3. Caution for AC Cord (For EB/GC/GH) --------------- 7
2.4. How to Replace the Lithium Battery ------------------ 8
3 Service Navigation ----------------------------------------------- 9
3.1. Introduction-------------------------------------------------- 9
3.2. About service of bundled lenses----------------------- 9
3.3. Important Notice ------------------------------------------- 9
3.4. Service Notes----------------------------------------------13
3.5. General Description About Lead Free Solder
(PbF)---------------------------------------------------------15
3.6. How to Define the Model Suffix (NTSC or PAL
model) -------------------------------------------------------16
4 Specifications ----------------------------------------------------20
5 Location of Controls and Components ------------------26
6 Service Mode -----------------------------------------------------28
6.1. Error Code Memory Function--------------------------28
7 Troubleshooting Guide ----------------------------------------30
7.1. Checking Method of Body and
Interchangeable Lens -----------------------------------30
7.2. Failure Diagnosis of NFC-------------------------------35
7.3. Wi-Fi P.C.B. ------------------------------------------------35
7.4. Troubleshooting Guide of the acceleration
sensor -------------------------------------------------------36
8 Service Fixture & Tools----------------------------------------37
8.1. Service Fixture and Tools-------------------------------37
8.2. Clean Box --------------------------------------------------38
8.3. Service Position-------------------------------------------39
9 Disassembly and Assembly Instructions ---------------40
9.1. Camera Body Part----------------------------------------40
9.2. Disassembly and Assemble Procedure for the
Lens----------------------------------------------------------52
10 Measurements and Adjustments---------------------------53
10.1. Matrix Chart for Replaced Part and Necessary
Adjustment -------------------------------------------------53
11 Maintenance-------------------------------------------------------55
11.1. Notice in external cleaning -----------------------------55
12 Block Diagram----------------------------------------------------56
12.1. Overall Block Diagram ----------------------------------56
12.2. System Control Block Diagram -----------------------57
12.3. Video/Audio Process Block Diagram ----------------58
12.4. Sensor Block Diagram ----------------------------------59
12.5. Lens/Flash Block Diagram -----------------------------60
12.6. Power Block Diagram -----------------------------------61
13 Wiring Connection Diagram ---------------------------------62
13.1. Interconnection Diagram--------------------------------62
To Next Page
Loading...
