46
9.1.3.7. Removal of the Mount Box Unit
(Fig. D9)
(Fig. D10)
9.1.3.8. Removal of the NFC Antenna Unit
(Fig. D11)
• Body Cap
• Screw (M) x 4
Screw (M)
IMPORTANT NOTICE:
• Do not touch further inside than the lens mount.
• Be careful not to touch the shaded portion
(X
contact and motor, etc.) so that the
characteristic
of
the mount box unit may change.
Mount Box Unit
Screw (M)
TI
3mm
SILVER
IMPORTANT NOTICE:
• Do not touch further inside than the lens mount.
• Be careful not to touch the shaded portion
(X contact and motor, etc.) so that the
characteristic
of
the mount box unit
may
change.
(Handle it as shown in the figure below.)
Mount Box Unit
NFC Antenna Unit
Screw (N)
T:=I3mm
SILVER
• Screw
(N) x 2
To Next Page
Loading...
