13. Others
340
• Is the flash closed?
> Open the flash. (P198)
• When the electronic shutter is used, the flash is not activated. (P161)
> Set [Shutter Type] to [AUTO] or [EFC].
• When [Silent Mode] is set to [ON], the flash is not activated. (P181)
> Set [Silent Mode] to [OFF].
• The flash is activated 2 times.
The interval between the first and second flash is longer when Red-Eye Reduction (P201) is
set so the subject should not move until the second flash is activated.
• If no operations are performed during the set time period, [Auto Monitor Off] (P64) is activated,
and the Monitor turns off.
• Check [Monitor Luminance] setting. (P64)
• Perform [Monitor Display]. (P63)
• This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
Flash
The flash is not activated.
The flash is activated 2 times.
Monitor
The Monitor turns off although the camera is turned on.
The Monitor is too bright or dark.
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
To Next Page
Loading...
